Ag Leader PF3000Pro Cotton Yield Monitor Operators Manual - Manual (Page 27)

PF3000 Pro Cotton Yield Monitor
Ag Leader Technology Card Setup
July 2003 2-13
Copying Data to
Log File
IMPORTANT: Before you remove the memory card from the
monitor, you must copy memory to every log file that you have
logged to, otherwise your data could be lost. Every time you turn
off the monitor, it will automatically copy memory to card (this
copies memory only to the file set as the log file).
To copy memory to log files that are not set as the current log file, press the
SHOW FILES key and select one of the log files. Press the FILE OPTIONS
key and press the COPY TO FILE key. At the card setup screen, press the
COPY TO CARD key to copy memory to the file set as the log file (this is the
same copy to card function that you are prompted to do during shut down).
Restoring from
File
You can restore field and load data into the monitor’s memory from a log file
on a memory card..
IMPORTANT: It is dangerous to restore memory from a card
because the current data in the monitor will be replaced with the
data on card.