Ag Leader PF3000Pro Cotton Yield Monitor Operators Manual - Manual (Page 71)

PF3000 Pro Cotton Yield Monitor
Ag Leader Technology Calibrating Vibration
July 2003 3-19
Calibrating for
Vibration
The vibration calibration is not automated at this time. If you suspect that
vibration is causing false cotton flow, call Ag Leader Technology Technical
Support at 515-232-5363.
Refer to the previous section on “Calibrating Seed Cotton Weight” where the
C Values are discussed.
C Numbers The three C Numbers, C1, C2 and C3 determine the pounds that the monitor
calculates. You can display the C numbers by pressing the SET UP CAL
then EDIT SETTINGS at the cotton weight calibration screen where you
choose the cotton calibration set.
IMPORTANT: Do not change the C numbers after you have
calibrated.
Refer to the previous section on “Calibrating Seed Cotton Weight” where
the C Values are discussed.
* * *