Ag Leader PF3000Pro Cotton Yield Monitor Operators Manual - Manual (Page 103)

PF3000 Pro Cotton Yield Monitor
Ag Leader Technology Display Items
July 2003 4-25
Field and Load
Totals When the following are displayed you can see a field, load total or average.
Yield Volume
Weight Lint Weight
Area Lint Yield
To view a field total you must have the field displayed without the load.
Press the FIELD key to display the field alone on the top line. To view a
load total, you must have the load displayed with the field on the top line.
Press the LOAD key to display the load on the top line.
Harvest Display
Items
Below are listed in order the available display items for the harvest mode.
YIELD
This displays the instantaneous seed cotton yield in pounds per acre (kg per
hectare) while you are harvesting. If you are not harvesting, the average
yield is displayed. If you select this line it will also show the average yield
while you are harvesting.
WEIGHT (seed cotton)
Displays the total weight of seed cotton of that load or field in pounds (kg)
AREA
This displays the area harvested for the current field/load in acres (hectares).
SWATH
This displays the swath width of the picker in feet (meters) or as the number
of rows. If you have swath selected, you can use the UP or DOWN arrow
keys to set a partial swath and adjust it back to full swath again.
LINT YIELD
This displays the instantaneous lint yield per acre while you are harvesting.
This can be displayed as either bales per acre or lbs per acre. If you are not
harvesting, the average yield is displayed. If you select this line it will also
show the average yield while you are harvesting. This is calculated using
the lint percent turnout entered under its calibration set.
LINT WEIGHT
Displays the total weight of the lint cotton of that load or field in pounds
(kg). This is calculated using the lint percent turnout entered under its
calibration set.