Using resource partition and other p9500 products, Parallel access volumes, Thin provisioning z – HP XP P9500 Storage User Manual
Page 28: Parallel access volumes thin provisioning z
2.
Click one or more resource groups to delete in the Resource Groups tab.
3.
Click Delete Resource Groups.
4.
In the Confirm window, confirm the settings, in Task Name type a unique name for this task
or accept the default, and then click Apply.
If Go to tasks window for status is checked, the Tasks window opens.
Using Resource Partition and other P9500 products
To use Resource Partition with other P9500 products, the resources that are required for the
operation must satisfy specific conditions. The following topics provide information about the
specific resource conditions that are required for using each P9500 product.
•
“Parallel Access Volumes” (page 28)
•
“Thin Provisioning Z” (page 28)
•
•
“Performance Monitor” (page 29)
•
•
“Continuous Access Synchronous Z” (page 30)
•
“Continuous Access Journal Z” (page 30)
•
•
•
•
•
Parallel Access Volumes
The following table provides information about specific Parallel Access Volumes conditions that
must be observed when using Resource Partition.
Condition
Operation name
The specified base volumes and free volumes must be assigned to the Storage
Administrator group permitted to manage them.
Assign aliases
The specified base volumes and alias volumes must be assigned to the Storage
Administrator group permitted to manage them.
Remove aliases
Thin Provisioning Z
The following table provides information about specific Thin Provisioning Z conditions that must
be observed when using Resource Partition.
Condition
Operation name
The ID of the new LDEV for Thin Provisioning Z must be assigned to the Storage
Administrator group permitted to manage them.
Create LDEVs
Both the deleted LDEV and the pool VOLs of the pool where the LDEV belongs must
be assigned to the Storage Administrator group permitted to manage them.
Delete LDEVs
Volumes to be specified as pool-VOLS must be assigned to the Storage Administrator
group permitted to manage them.
Create pools
Expand pools
28
Configuring resource groups