HP XP P9500 Storage User Manual
Page 204
Description
Item
Preparing Quick Format: Volume is being prepared for quick formatting.
Quick Formatting: Volume is being quick-formatted.
Correction Access: Access attribute is being corrected.
Copying: Data in the volume is being copied.
Read Only: Data cannot be written on a read-only volume.
Shredding: Volume is being shredded.
Hyphen (-): Any status other than the above.
The RAID level. An asterisk "*" indicates that the parity group to which the LDEV
belongs is interleaved (concatenated). Either RAID level of the parity group
appears.
RAID Level
The emulation type.
Base Emulation Type
The capacity of the free space. The control information, such as control cylinders,
used by the storage system is not included in the displayed capacity.
Capacity - Free
The total capacity of the LDEVs and "Capacity - Free" is displayed.
Capacity - Total
The number of unallocated LDEVs.
Number of LDEVs - Unallocated
The total number of LDEVs.
Number of LDEVs - Total
The drive type and rpm in use on this LDEV.
Drive Type/RPM
The protection status on the parity group.
Protection
•
SATA-W/V, SATA-E, or Standard.
•
Standard is for SAS, SSD, and External.
The encryption key information.
Encryption Key
•
Key identifier for the encrypted parity group.
•
Disable for the non-encrypted parity group.
Displays the attribute of the parity group.
•
Online Data Migration: Parity group for online data migration.
•
Hyphen (-): The parity group in which the attribute is not defined.
Attribute
The resource group name and ID of which this parity group is a member.
Resource Group Name (ID)
Opens the Create LDEVs window.
Create LDEVs
Opens the Format LDEVs window.
Format LDEVs
Opens the Edit Encryption window.
Edit Encryption
Opens a window where you can export configuration information listed in the
table to a file that can be used for multiple purposes, such as backup or reporting.
Export
Window after selecting a parity group under Internal (or External) of Parity
Groups
Use this window to view information about the parity groups in the internal (or external) volume.
Only the parity groups assigned to the logged-on user are available.
•
•
204 LDEV GUI reference