HP XP P9500 Storage - Manual (Page 233)

Basic Properties table
Description Item
Displays the following: Parity Group
• Interleaved Parity Groups: Displays the interleaved parity groups.
•
RAID Level: Displays the RAID level of parity group. The asterisk (*)
indicates the parity group is the interleaved parity group.
•
Drive Type/RPM: Displays the hard disk drive type and RPM.
• Protection: SATA W/V, SATA E, or Standard is displayed. Standard
indicates that a SAS drive, SSD, and an external volume is used.
•
Encryption: Displays the setting (enable or disable) of encryption.
• ID: Displays the parity group ID.
Displays the following: Pool
•
Name (ID): Displays the pool name and ID.
• RAID Level: Displays the RAID level of pool.
•
Type: Displays the hard disk drive type of pool.
Displays the LDEV capacity of the selected LDEV. Individual Capacity
Display the type of LDEV. Provisioning Type
•
Basic: Internal volume.
•
THP: THP V-VOL.
• External: External volume.
•
Snapshot: Fast Snap volume or Snapshot volume.
• External MF: Migration volume.
Displays the LDEV status. Status
•
Normal: Normal status.
• Blocked: Host cannot access blocked volumes.
•
Warning: Problem occurs in the volumes.
• Formatting: Volumes are being formatted.
•
Preparing Quick Format: Volumes are being prepared for quick
formatting.
• Quick Formatting: Volumes are being quick-formatted.
•
Correction Access: Access attribute is being corrected.
•
Copying: Data in the volumes are being copied.
• Read Only: Data cannot be written on the Read Only volumes.
•
Shredding: Volumes are being shredded.
Displays the attribute of the LDEV. Attribute
• Command Device: Command device.
•
Remote Command Device: Remote command device.
• System Disk: System disk.
•
JNL VOL: Journal volume.
• Pool VOL: Pool volume. The number in parentheses shows the pool ID.
•
Reserved VOL: Reserved volume.
•
Quorum Disk: Quorum disk for External Storage Access Manager.
• TSE: TSE-VOL.
•
Online Data Migration: Volume for online data migration.
• Hyphen (-): Volume in which the attribute is not defined.
LDEV Properties window 233