HP XP P9500 Storage - Manual (Page 193)

Selected LDEVs table
Description Item
The identifiers of the LDEVs to be added to a resource group. LDEV ID
Some undefined LDEV IDs may appear. A hyphen in the LDEV name indicates the LDEV
is undefined.
The LDEV names. LDEV Name
The parity group identifier where the LDEV belongs. Parity Group ID
The pool name and identifier where the LDEV belongs. Pool Name (ID)
The capacity of the LDEV. Capacity
The provisioning type of the volume. Provisioning Type
• Basic: Internal volume
•
THP: V-VOLs of Thin Provisioning
•
Snapshot: Fast Snap volume or Snapshot volume
• External MF: Migration volume
The attribute of the volume indicating how the LDEV is being used. Attribute
•
Command Device: Command device.
•
Remote Command Device.
•
System Disk.
• JNL VOL: Journal volume.
•
Pool VOL: Pool volume. The number in parentheses is the pool identifier.
• Reserved VOL: Reserved volume.
•
Quorum Disk: Quorum disk for External Storage Access Manager.
•
TSE: TSE-VOL.
• Online Data Migration: Volume for online data migration.
•
Hyphen (-): Volume in which the attribute is not defined.
The journal group identifier appears when the attribute is JNL VOL. A hyphen indicates
the attribute is other than JNL VOL. Journal Group ID
The total number of selected LDEVs. Total
Selected Ports table
Description Item
The port identifiers to be added to a resource group. Port ID
The attribute of the port indicating I/O flow. Attribute
•
Initiator: Issues I/O commands to a target port when I/O is executed between storage
systems with Continuous Access Synchronous, and so on.
• Target: Receives I/O commands from a host.
•
RCU Target: Receives I/O commands from an initiator when I/O is executed between
storage systems with Continuous Access Synchronous, and so on.
• External: Issues I/O commands to a target port of an external storage system with
External Storage.
The total number of selected ports. Total
Add Resources wizard 193