HP XP P9500 Storage - Manual (Page 217)

Selected LDEVs table
Description Item
The LDEV identifier, which is the combination of LDKC, CU, and LDEV. LDEV ID
The LDEV name, including the combination of prefix characters and the
initial number. LDEV Name
The parity group identifier. Parity Group ID
The pool name (pool identifier). Pool Name (ID)
The drive type and rpm in use on this LDEV. Drive Type/RPM
The RAID level. An asterisk "*" indicates that the parity group to which
the LDEV belongs is interleaved (concatenated). RAID Level
The emulation type. Emulation Type
The LDEV capacity. Capacity
The type of LDEV. Provisioning Type
• Basic: Internal volume.
•
THP: THP V-VOL.
•
External: External volume.
• Snapshot: Fast Snap volume or Snapshot volume.
The format type. Format Type
The storage system identifier in hexadecimal format. SSID
The cache logical partition number, in ID:CLPR format. CLPR
For detailed information about CLPRs, see the HP XP P9000 Cache Partition
User Guide.
Processor blade identifier. If Auto is selected, the ID is automatically
assigned. MP Blade ID
Indicates whether the LDEV is being used as the system disk. System Disk
• Yes: System disk.
•
No: Not system disk.
Displays whether Smart Tiers or Smart Tiers Z is enabled or disabled. Smart Pool
Enable: The LDEV for Smart Tiers or Smart Tiers Z is displayed.
Disable: The LDEV for Thin Provisioning or Thin Provisioning Z is displayed.
Displays the tiering policy name and ID for the LDEV. Tiering Policy
Displays the new page assignment tier for the LDEV. New Page Assignment Tier
The relocation priority assigned to the LDEV. Relocation Priority
Displays the attribute of the LDEV. Attribute
TSE: TSE-VOL.
-: Volume in which attribute is not defined.
The resource group name and ID of which this LDEV is a member. Resource Group Name (ID)
Edit LDEVs wizard
Use this window to change the LDEV name.
Edit LDEVs wizard 217