HP Business Inkjet 2600 Printer series - Manual (Page 81)

ENWW 7-21
! Several kinds of paper require a specific orientation when you print
on both sides of a page, such as letterhead, preprinted paper, and
paper with watermarks and prepunched holes. The auto-duplex unit
prints the second side of paper first. For tray 1 and tray 2, load the
paper with the front side facing down. For the front manual feed,
load the paper with the front side facing up.
! If you attempt to print on both sides of paper without an auto-duplex
unit installed, the printer prints the document automatically on one
side of the paper.
! When the auto-duplex unit is installed, the rear manual feed is
unavailable.
Layout options
The four orientation options for printing on both sides of a page are
shown below. These options can be selected from the printer driver or
from the LCD control panel by setting
BINDING from the Paper
Handling Menu and ORIENTATION from the Printing Menu. For
information about using the LCD control panel, see “Using the LCD
control panel.”
Note For Macintosh, select portrait or landscape orientation in the Page Setup
dialog box.