HP Business Inkjet 2600 Printer series - Manual (Page 39)

ENWW 4-7
Checking memory installation
Follow this procedure to verify that DIMMs are installed correctly.
To check memory installation
1 Check that READY appears on the LCD control panel when the
printer is turned on. If an error message appears, a DIMM might
have been incorrectly installed. For information about printer
messages, see “Common printer messages.”
2 Print a new configuration page. See “Printing a Configuration
Page.”
3 Check the memory section on the configuration page and compare
it to the configuration page printed before the DIMM installation. If
the amount of memory has not increased, one of the following
problems might have occurred:
• The DIMM might not be installed correctly. Repeat the
installation procedure.
• The DIMM might be defective. Try a new DIMM.