HP Business Inkjet 2600 Printer series - Manual (Page 24)

2-14 ENWW
Step 10: Enable the HP Auto-Duplex Unit
in the printer driver (optional)
If you have installed an HP Auto-Duplex Unit, you must enable it in the
printer driver.
Note For Macintosh instructions, see “Using the printer with a Macintosh
computer.”
If you are using operating systems other than Windows or the Mac OS,
you might need to enable the auto-duplex unit from the LCD control
panel’s Printing Menu. For more information, see “Printing Menu.”
To enable the auto-duplex unit in Windows
1 Click Start , point to Settings , and then click Printers (Windows 95,
Windows 98, Windows Millennium Edition, Windows NT 4.0, and
Windows 2000).
-Or-
Click Start , and then click Printers and Faxes (Windows XP).
2 Right-click the icon for the desired printer driver, and then click
Properties .
• PCL 5C: On the Configure tab, select the Duplexing Unit
check box, and then click OK .
• PS: On the Device Options tab, click Duplexing Unit (for 2-
sided printing) , choose Installed from the drop-down menu,
and then click OK .