HP Business Inkjet 2600 Printer series - Manual (Page 76)

7-16 ENWW
To print on envelopes and cards using the rear manual
feed
Note If you want to print using the rear manual feed and an optional auto-
duplex unit is installed in the printer, remove the duplex unit and reinstall
the rear manual feed.
For more information about configuring settings in the printer driver, see
“Using the printer driver.”
1 In the printer driver, select Manual Feed as the media source, and
then select the envelope or card size.
2 Print the document.
3 When the indicator light on the LCD control panel blinks, insert one
envelope (with the flap facing down) along the left edge of the rear
manual feed. For more information, see “Loading the manual feed
units.”
4 Press R ESUME on the LCD control panel.
After each page prints, the printer prompts you to load another
envelope. Load envelopes, as needed, until the printer finishes
printing.
To print on envelopes and cards using tray 1
1 Load the envelopes or cards in tray 1. (If you are loading
envelopes, make sure the flap is facing up.) For more information
about loading media, see “Load paper and configure media types
and sizes.”
2 In the printer driver, select Tray 1 as the media source, and then
select the envelope or card size.
3 Print the document.
Printing on transparencies
When printing on transparencies, use the following guidelines:
! Use tray 1 to print on transparencies. The printer automatically
detects that transparencies are loaded and optimizes the printing
process to allow the transparencies to dry completely. (You can
load up to 80 transparencies in tray 1.)
! By default, the printer automatically detects transparencies loaded
in tray 1. For information about turning on and turning off this
setting, see “Changing the transparency sensor setting.”