HP Business Inkjet 2600 Printer series - Manual (Page 35)

ENWW 4-3
Step 2: Verify that the printer works
1 Connect the power cord and turn on the printer.
2 Press M ENU on the LCD control panel repeatedly until
INFORMATION appears.
3 Press I TEM repeatedly until PRINT CONFIGURATION PAGE appears.
4 Press S ELECT to print the configuration page.
Note Because you have installed an HP Jetdirect print server, two
configuration pages print. The HP Jetdirect Configuration Page contains
setup information (for example, LAN HW ADDRESS) that might be
needed for the next step.
Step 3: Install the printer software
Install the PCL 5C or Postscript printer driver from the Starter CD. For
more information, see “Install the printer software and connect the
interface cable.”
Note For more information about setting up and using the HP Jetdirect print
server, see its guide
on the Starter CD.