HP Business Inkjet 2600 Printer series User Manual

Page 48

5-8

ENWW

CFG IPX/SPX

NO
YES

Selects whether you want to use the
IPX/SPX menu and set the IPX/SPX
protocol parameters.
In the IPX/SPX menu, you can specify
the Frame Type parameter used on your
network.

The default is AUTO, which
automatically sets and limits the
Frame type to the one detected.

For Ethernet cards, frame type
selections include

EN_8023

EN_II

EN_8022

EN_SNAP

For Token Ring cards, frame type
selections include

TR_8022

TR_SNAP

In the IPX/SPX menu for Token Ring
cards, you can also specify NetWare
Source Routing parameters, which
include

SRC RT=AUTO

(default),

OFF

SINGLE R

ALL RT

CFG TCP/IP

NO
YES

Selects whether you want to use the
TCP/IP menu and set the TCP/IP
protocol parameters.
In the TCP/IP menu, you can specify

BOOTP=YES

DHCP=YES

for TCP/IP

parameters to be automatically
configured by a BootP or DHCP server
when the printer is turned on.
If you specify

BOOTP=NO

and

DHCP=NO

, you can manually set the

following TCP/IP parameters from the
LCD control panel:

Each byte of the IP address (IP)

Subnet Mask (SM)

Syslog Server (LG)

Default Gateway (GW)

Idle Timeout period (default is 270
seconds; 0 disables the timeout)

When setting IP numbers, press

ALUE

to increase the number by 1. Press

ELECT

to make your selection.

Message

Value

Description