Storage setup for windows (single-path), 24 connected target status, Figure 24 – HP EVA Array iSCSI Connectivity Option User Manual
Page 67
Figure 24 Connected target status
NOTE:
Each target represents a path to the EVA. Logging into multiple targets may inadvertently
present the same LUN multiple times to the operating system.
Storage setup for Windows (single-path)
To set up LUNs using HP Command View:
1.
Set up LUNs using HP Command View.
See
Using HP Command View EVA to configure LUNs to iSCSI initiators
2.
Set up the iSCSI drive on the iSCSI Initiator:
a.
Open the Windows Computer Management window.
b.
Select Disk Management.
c.
Select Action > Rescan Disks.
nl
The newly created Vdisk should appear as a disk to the operating system; if it does not,
reboot the iSCSI Initiator.
d.
Format and partition the disk.
About Microsoft Windows server 2003 scalable networking
pack
The Microsoft Windows Server 2003 Scalable Networking Pack contains functionality for offloading TCP
network processing to hardware. TCP Chimney is a feature that allows TCP/IP processing to be offloaded
to hardware. Receive Side Scaling allows receive packet processing to scale across multiple CPUs.
HP’s NC3xxx Multifunction Gigabit server adapters and Alacritech's SES2xxxxx adapters support TCP
offload functionality using Microsoft’s Scalable Networking Pack (SNP).
For more support details, read the latest HP adapter information for more support details.
To download the SNP package and for more details see:
SNP setup with HP NC 3xxx GbE multifunction adapter
Microsoft’s Scalable Networking Pack works in conjunction with HP’s NC3xxxx Multifunction Gigabit
server adapters and Alacritech's SES2xxxxx adapter for Windows 2003 only.
To set up SNP on a Windows 2003 server:
1.
Install the hardware and necessary software for the NC3xxx Multifunction Gigabit server adapter,
following the manufacturer’s installation procedures.
EVA iSCSI connectivity user guide
67