HP EVA Array iSCSI Connectivity Option - Manual (Page 102)

Figure 50 MPIO Properties page
Installing the MPIO feature for Windows Server 2003
For Windows Server 2003, if you are installing the initiator for the first time, check all the installation
option checkboxes and then click Next to continue ( Figure 51 ).
To add or remove specific MS iSCSI software Initiator components after the initial install, run the setup
package executable and select the check box to add MPIO. The application automatically checks
the boxes for components that are already installed. For example, if you want to add the MS MPIO
component, leave the other check boxes unchecked; check only the MS MPIO check box.
NOTE:
The installation requires a reboot.
IMPORTANT:
Windows XP Professional is not supported by Microsoft's MPIO.
102 Setting up the iSCSI Initiator for multipathing