HP EVA Array iSCSI Connectivity Option - Manual (Page 147)

History command
Displays a history of the commands the user has issued through the CLI.
Authority Admin session only to set
Syntax history
Notes Closing a Telnet window during an admin session does not release the session.
You must either wait for the admin session to time out, or use the Admin
Cancel
command.
Example The following is an example of the history command:
mpx100 (admin) #> history
mpx100 (admin) #> history
1: admin start
2: help
3: history
mpx100r (admin) #>
Image command
Updates and the mpx100/100b firmware image and cleans up (removes) the image files in the
mpx100/100b /var/ftp directory.
Authority Admin session only to set
Syntax
image
cleanup
unpack
list
Keywords
cleanup
: Removes any firmware image filed in the mpx100/100b
/var/ftp
directory. These are files transferred by the user when updating
the mpx100/100b firmware image.
unpack []
: Unpacks the firmware image file specified in the
filename
parameter and installs the firmware image on the mpx100/100b.
The mpx100/100b must be rebooted for the new firmware image to be
activated. The firmware image file must first have been transferred to the
mpx100/100b /var/ftp directory using ftp.
list
: Displays the firmware files available for load.
Example The following is an example of the image command:
mpx100 (admin) #> image unpack iSR-6140-2_0_0_1.bin
Unpack Completed. Please reboot the system for FW to take effect.
mpx100 (admin) #> reboot
Are you sure you want to reboot the System (y/n): y
System will now be rebooted...
Initiator command
Adds, modifies, or removes an initiator in the mpx100/100b database.
EVA iSCSI connectivity user guide 147