HP EVA Array iSCSI Connectivity Option - Manual (Page 33)

• Fibre Channel LUNs and iSCSI LUNs are not supported on the same server.
• NIC bonding is not supported.
Does not support:
• NIC bonding
iSCSI Initiator operating system considerations:
• Configure the Linux host mode iSCSI Initiator setting through the mpx Manager GUI, CLI or through
HP Command View 6.0.2 or later. See “ HP StorageWorks mpx manager for Windows ” on page 57
for more information.
Solaris iSCSI Initiator rules and guidelines
Configure the host mode iSCSI Initiator setting through the mpx Manager GUI, CLI or through HP
Command View. See HP StorageWorks mpx manager for Windows , page 57 for more information.
Operating system considerations:
• For HP Command View 7.0 and earlier, Solaris iSCSI initiators should be set to Linux host mode.
• For HP Command View 8.0 and later, Solaris iSCSI initiators should be set to Solaris host mode.
Supports:
• Solaris 10, update 4 and update 5, iSCSI Initiator only
• Multipath
• Any native Solaris 1 GbE NIC
Does not support:
• TOE or iSCSI HBA
Solaris iSCSI Initiator multipath rules and guidelines
Supports:
• Solaris 10 MPxIO only.
• Multipath on single or dual mpx100's/100b's.
• MPxIO Symmetric option only.
• MPxIO round-robin.
• MPxIO auto-failback.
Does not support:
• LUN 0
• SecurePath
OpenVMS iSCSI Initiator rules and guidelines
The following lists OpenVMS iSCSI Initiator rules and guidelines:
OpenVMS hardware requirements
The OpenVMS iSCSI Initiator has the following hardware requirements:
• Architecture
• The software supplied in the iSCSI Initiator Technology Demonstration Kit (TDK) is supported
on both Alpha and I64 architectures.
EVA iSCSI connectivity user guide 33