HP EVA Array iSCSI Connectivity Option - Manual (Page 142)

• Required keyword values appear in standard font: [value]. Optional values are shown in
italics: [value].
• Underlined portions of the keyword in the command format indicate the abbreviated form that
can be used. For example, the Delete keyword can be abbreviated Del.
The command-line completion feature makes entering and repeating commands easier. Table 20 lists the
command-line completion keystrokes.
Table 20 Command-line completion
Keystroke Effect
Tab
Completes the command line. Enter at least one character and press Tab to
complete the command line. If more than one possibility exists, press Tab again
to display all possibilities.
Up arrow Scrolls backward through the list of previously entered commands.
Down arrow Scrolls forward through the list of previously entered commands.
Ctrl+E Moves cursor to the end of the command line.
The command set performs monitoring and configuration tasks:
• Commands related to monitoring tasks are available to all account names.
• Commands related to configuration tasks are available only within an Admin session.
• An account must have Admin authority to enter the Admin Start command, which opens an Admin
session. See the “ Admin command ” on page 142.
Admin command
Opens and closes the Admin session. The Admin session provides commands that change mpx100/100b
configurations. Only one Admin session can be open on the mpx100/100b at any time. An inactive
Admin session will time out after a period of time which can be changed using the Set Properties
command.
Authority Admin
Syntax
adminstart (or begin) end (or stop) cancel
Keywords
start (or begin)
Opens the Admin session.
end (or stop)
Closes the Admin session. The Logout, Shutdown, and Reset commands
will also end an Admin session.
142 Command line interface