HP EVA Array iSCSI Connectivity Option - Manual (Page 143)

cancel
Terminates an Admin session opened by another user. Use this keyword with
care because it terminates the Admin session without warning the other user
and without saving pending changes.
Notes
Closing a Telnet window during an admin session does not release the session.
In this case, you must either wait for the Admin session to time out, or use the
Admin Cancel
command.
Examples
The following example shows how to start and end an Admin session:
mpx100 #> admin start
Password: ******
mpx100(admin) #>
.
.
.
mpx100(admin) #> admin end
mpx100 #>
Beacon command
Enables or disables the flashing of the LEDs. This command does not require an Admin session.
Authority None
Syntax
beacon
on
off
Keywords
on
: Turns on the mpx100/100b beacon.
off
off
: Turns off the mpx100/100b beacon.
Example mpx100 #> beacon on
Date command
Displays or sets the date and time. The information string must be provided in the format MMDDhhmmCCYY.
The new date and time take effect immediately.
Authority Admin session only to set date
Syntax date
[MMDDhhmmCCYY]
EVA iSCSI connectivity user guide 143