HP EVA Array iSCSI Connectivity Option - Manual (Page 187)

ID Log message Message
Number
139289 QBRPC_Initialize:TgtDevice Mem Allocation error 25
139296 QBRPC_Initialize:FcTgt Mem Allocation error 32
139297 QBRPC_Initialize:BridgeStatus Mem Allocation error 33
139298 QBRPC_Initialize:Diag Mem Allocation error 34
139299 QBRPC_Initialize:DiagLog Mem Allocation error 35
139300 QBRPC_Initialize:FruImage Mem Allocation error 36
139301 QBRPC_Initialize:OemMfg Mem Allocation error 37
139302 QBRPC_Initialize:Status Mem Allocation error 38
139303 QBRPC_Initialize:TcpIpStats Mem Allocation error 39
139304 QBRPC_Initialize:NtpStats Mem Allocation error 40
139305 QBRPC_Initialize:LUNList Mem Allocation error 41
139315 QBRPC_FreeResources:Entered 51
139553 checkDuplicateIp: Detected Error %08x %08x%04x 289
System
The error log messages provided by system modules are listed and described in Table 28 .
Table 28 System—error log messages
ID Log message Message Number
237572 Failed to kill sys killer %d\n 4
Fatal log messages
The following sections list the fatal log messages by reporting module.
iSCSI driver
The fatal error log messages for iSCSI drivers are listed and described in Table 29 . Log messages
beginning with #0 apply to iSCSI port 1 (GE1) and log messages beginning with #1 apply to iSCSI
port 2 (GE2).
Table 29 iSCSI driver—fatal log messages
ID Log message
Mes-
sage
Num-
ber
Description
69652
#%d: qlutm_init:
Diagnostic failed, invalid
SRAM
20 iSCSI processor SRAM test failed.
69653
#%d: qlutm_init:
Diagnostic failed, fail
reboot
21 iSCSI processor failed diagnostic reboot.
EVA iSCSI connectivity user guide 187