HP EVA Array iSCSI Connectivity Option - Manual (Page 148)

Authority Admin session only to set
Syntax
initiator
add
mod
remove
Keywords
add
: Adds an initiator to the mpx100/100b database.
mod
: Modifies the settings of an initiator.
remove
: Removes an initiator.
Examples The following is an example of the initiator add command:
A list of attributes with formatting and current values follows.
Enter a new value or simply press Enter to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the Enter key to do so.
iSCSI Initiator Name (Max = 256 characters) [ ]
iqn.1991-05.com.microsoft:hp-09sd5i4l
OS Type (0=MS Windows, 1=Linux 2=Mac [MS Windows ]
CHAP (0=Enable, 1=Disable) [Disabled ]
All attribute values that have been changed are saved.
The following is an example of the initiator mod command:
mpx100 (admin) #> initiator mod
Index (WWNN/iSCSI Name)
——————
0 iqn.1991-05.com.microsoft:hp-09sd5i4l
Select an Initiator from the list above ('q' to quit): 0
A list of attributes with formatting and current values will follow.
Enter a new value or press Enter to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and Enter to do so.
OS Type (0=MS Windows, 1=Linux) [MS Windows ] 1
CHAP (0=Enable, 1=Disable) [Disabled ]
All attribute values that have been changed are saved.
The following is an example of the initiator remove command:
mpx100 (admin) #> initiator rm
Index (WWNN/iSCSI Name)
———————-
0 iqn.1991-05.com.microsoft:hp-09sd5i4l
Select an Initiator from the list above ('q' to quit): 0
All attribute values that have been changed are saved.
Logout command
Exits the CLI and returns the operator to the login prompt.
Authority Admin session only to set
Syntax
logout
Example mpx100 #>
LUNmask command
Maps a target LUN to an initiator. Also removes mappings. The command prompts the operator to
pick from a list of targets, LUNs, and initiators.
148 Command line interface