HP EVA Array iSCSI Connectivity Option - Manual (Page 181)

Error log messages
The following sections list and describe, by reporting module, the error log messages.
Application modules
The error log messages provided by application modules are listed in Table 24 and described in this
section.
Table 24 Application module—error log messages
ID Log message Mes-
sage
Number
Description
40967 QLBA_NullDoorbell: driver unloaded,
port disabled
7
Null doorbell routine for unloaded drivers.
When a driver is unloaded, the doorbell
routine is redirected to this null routine.
40996 QLBA_ProcessTrb: Processing
unsupported ordered tag command
36
Processing unsupported ordered-tag Task
Management command.
41004
QLBA_ProcessTrb: Processing
unsupported head of queue tag
command
44
Processing unsupported head-of-queue Task
Management command.
41058 QLBA_CreateTargetDeviceObject: Too
many devices
98
Unable to create object for target device:
exceeded maximum number of target
devices.
41060 QLBA_CreateTargetNodeObject: Too
many devices
100
Unable to create object for target node:
exceeded maximum number of target
devices.
41067 QLBA_CreateLUNObject: LUNObject
memory unavailable
107 Memory unavailable for LUN object.
41077 QLBA_CreateInitiatorObject: Too
many initiators
117
Unable to create object for initiator object:
exceeded maximum number of initiators.
41096 QLBA_DisplayTargetOperationStatus:
PCI Error, Status 0x%.2x
136
Process control block status indicates a PCI
error during a target operation.
41106 QLBA_DisplayInitiatorOperationStatus:
DMA Error, Status 0x%.2x
146
Process control block status indicates a DMA
error during an initiator operation.
41107
QLBA_DisplayInitiatorOperationStatus:
Transport Error, Status 0x%.2x
147
Process control block status indicates a
transport error (protocol) during an initiator
operation.
41111
QLBA_DisplayInitiatorOperationStatus:
Data Overrun, Status 0x%.2x
151
Process control block status indicates a data
overrun error during an initiator operation.
41508
QLBI_SetPortInfo: QLUT_AllocatePor-
talObject failed (PortType 0x%x, PortId
0x%x)
548
Failed to allocate object for "Set Port Info"
IOCTL processing. PortType: 0 = FC, 1 =
iSCSI. PortId: 0 = FC1 or iSCSI1(GE1), 1 =
FC2 or iSCSI2 (GE2).
41768 QLBI_GetLUNList: REPORT LUNS
command failed
808
Report LUNs command failed. The
Report LUNs command was issued by the
mpx100/100b as part of its discovery
process.
41769
QLBI_GetLUNList: REPORT LUNS
command failed with CHECK
CONDITION, SCSI STATUS 0x%02X
809
Report LUNs command failed with CHECK
CONDITION status. The Report LUNs
command was issued by the mpx100/100b
as part of its discovery process.
EVA iSCSI connectivity user guide 181