HP EVA Array iSCSI Connectivity Option - Manual (Page 151)

Authority Admin session only to set
Syntax password
start (or begin)
end (or stop)
cancel
Example The following is an example of the password command:
mpx100 (admin) #> passwd
Press 'q' and the Enter key to abort this command.
Select password to change (0=guest, 1=admin): 1
account OLD password : ******
account NEW password (6-128 chars) : ******
please confirm account NEW password : ******
Ping command
Issues a ping to a device at a specific IP Address.
Authority Admin session only to set
Syntax ping
Quit command
Exits the CLI and returns the operator to the login prompt.
Authority Admin session only to set
Syntax
quit
Example The following is an example of the quit command:
mpx100 (admin) #> quit
(none) login:
Reboot command
Restarts the mpx100/100b firmware.
Authority Admin session only
Syntax reboot
Examples The following is an example of the reboot command:
mpx100 (admin) #> reboot
Are you sure you want to reboot the System (y/n): y
System will now be rebooted...
EVA iSCSI connectivity user guide 151