HP EVA Array iSCSI Connectivity Option User Manual
Page 138
2.
Open an admin session and enter the following commands to install the license:
a. Enter admin mode:
mpx100b #> admin start
Password: config
(default password)
b. Make sure the system date is set by entering the command:
mpx100b (admin) #> date
The system returns today's date and the current time. For example:
Thu Feb 28 16:56:00 2008
c. If the date is not set, you must set it. The format for entering the date is MMDDhhmmYYYY.
Enter the date as in the following example:
mpx100b (admin) #> date 022816562008
The system returns the date and time entered:
Thu Feb 28 16:56:00 2008
d. Enter the following CLI command at the prompt and then enter the license key exactly as shown
on the License Certificate:
mpx100b (admin) #> set features
A list of attributes with formatting and current values follows. Enter a new value or press Enter to
accept the current value. If you want to terminate this process before reaching the end of the
list, press q or Q and Enter simultaneously.
e. Enter the feature key to be saved or activated: 1000000–LCETMQV1000VM-
B8A27CF2–iSCSI-Server
All attribute values that have been changed are saved.
f. Verify that the licenses are installed on the mpx100b:
mpx100b (admin) #> show features
The system returns the following information:
Feature Key Information
- — — — — — — — — — —
Key
1000000–LCETMQV1000–B8A27CF2–iSCSI-Server
Date Applied Thu Feb 28 16:56:00 2008
Installing the EVA4400 iSCSI Connectivity 32 Initiator
Upgrade License with mpx Manager GUI
1.
Start the HP StorageWorks mpx Manager.
2.
In the left pane, select the desired mpx100b.
3.
In the right pane, select the Features tab and then click Add.
4.
Enter the license key in the New License Key dialog box (
138
EVA4400 iSCSI Connectivity 32 Initiator Upgrade License