HP EVA Array iSCSI Connectivity Option - Manual (Page 215)

Password: password
5. Enter the following command:
mpx100> admin start
6. Enter config as the password.
7. Enter the following command:
mpx100 (admin) #> fru restore
A list of attributes with formatting and current values will
follow.
Enter a new value or simply press the Enter key to accept
the current value. If you wish to terminate this process before
reaching the end of the list press 'q' or 'Q' and the Enter key to
do so.
Type of restore (0=full, 1=mappings only) [full]
FRU restore completed.
8. Reboot the system for the configuration to take effect.
EVA iSCSI connectivity user guide 215