Fc driver, 30 fc driver—fatal log messages – HP EVA Array iSCSI Connectivity Option User Manual
Page 189
ID
Log message
Mes-
sage
Num-
ber
Description
70502
#%d: QLProcessResponse-
Queue: Invalid handle %x
EntryType %x
870
Response queue invalid handle for specified entry type.
70524 #%d: QLProcessAen:
Invalid event %x
892
Asynchronous event for unknown event type.
70544 #%d: QLRebootTimer:
Reboot failed!
912
Reboot timer failed.
70563
#%d: QLReadyTimer:
Adapter missed heartbeat
for 0x%x seconds.
Rebooting
931
iSCSI driver missed iSCSI processor heartbeat. iSCSI
processor rebooted.
70564
#%d: QLReadyTimer:
Abort pTpb=%p failed,
DrvCount 0x%x
932
iSCSI processor failed to complete operation before
time-out.
70609 #%d: QLProcessSystemEr-
ror: Restart RISC
977
iSCSI processor: system error restart
70610 #%d: QLProcessSystemEr-
ror: RebootHba failed
978
iSCSI processor reboot failed.
70784 #%d: QLConfigChip:
invalid NVRAM
1152
iSCSI processor NVRAM invalid (checksum error).
FC driver
The fatal log messages are listed and described in
. Log messages beginning with #0 apply to
FC port 1 (FC1) and log messages beginning with #1 apply to FC port 2 (FC2).
Table 30 FC driver—fatal log messages
ID
Log message
Message
Number
Description
102419 #%d: qlutm_init: Diagnostic failed, port
1 invalid SRAM
19
FC1 processor SRAM test failed.
102420 #%d: qlutm_init: Diagnostic failed, port
1 POST failed
20
FC1 processor POST (power-on
self-test) failed.
102421 #%d: qlutm_init: Diagnostic failed, port
2 invalid SRAM
21
FC2 processor SRAM test failed.
102422 #%d: qlutm_init: Diagnostic failed, port
2 POST failed
22
FC2 processor POST failed.
102423 #%d: qlutm_init: Failed to return
diagnostic result to Bridge
23
FC processor failed to return diagnostic
results.
102656 #%d: QLInitializeAdapter: Reset ISP
failed
256
FC processor failed reset.
102657 #%d: QLInitializeAdapter: Load RISC
code failed
257
FC processor firmware load failed.
102658 #%d: QLInitializeAdapter: Load ISP2322
receive sequencer code failed
258
FC processor receive sequencer code
load failed.
EVA iSCSI connectivity user guide
189