HP EVA Array iSCSI Connectivity Option - Manual (Page 154)

Authority Admin session
Syntax set fc []
Parameters
port_num
: The number of the FC port to be configured.
Examples The following is an example of the set fc command:
mpx100 (admin) #> set fc
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the Enter key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the Enter key to do so.
WARNING:
The following command might cause a loss of connections to both ports.
Configuring FC Port: 1
————————-
Link Rate (0=Auto, 1=1Gb, 2=2Gb, 4=4Gb) [Auto ]
Frame Size (0=512B, 1=1024B, 2=2048B) [2048 ]
Execution Throttle (Min=16, Max=256) [64 ]
All attribute values for Port 1 that have been changed will now be saved.
Configuring FC Port: 2
————————-
Programmed Link Rate (0=Auto, 1=1Gb, 2=2Gb, 4=4Gb) [Auto ]
Frame Size (0=512B, 1=1024B, 2=2048B) [2048 ]
Execution Throttle (Min=16, Max=256) [64 ]
All attribute values for Port 2 that have been changed will now be saved.
Set Features command
Adds licenses for the mpx100/100b.
Set iSCSI command
Configures an iSCSI port.
154 Command line interface