HP EVA Array iSCSI Connectivity Option - Manual (Page 158)

Authority Admin session
Syntax
set snmp
Parameters trap_destinations
: The number of the trap destinations to be configured
for SNMP.
Examples
The following is an example of the set snmp command:
mpx100 (admin) #> set snmp
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the Enter key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the Enter key to do so.
Configuring SNMP:
—————–
Read Community [ ] Public
Trap Community [ ] Private
System Location [ ]
System Contact [ ]
Authentication Traps (0=Enable, 1=Disable) [Disabled ]
All attribute values that have been changed will now be saved.
Set System command
Configures the general mpx100/100b parameters.
Authority Admin session
Syntax set system
Parameters
port_num
: The number of the iSCSI port to be configured for iSNS.
Examples The following is an example of the set system command:
mpx100 (admin) #> set system
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the Enter key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the Enter key to do so.
System Symbolic Name (Max = 64 characters) [ ] testing
Mode (0=Normal, 1=Transparent, 2=Encap_FC) [0 ]
System Log Level (Min = 0, Max = 3) [0 ]
All attribute values that have been changed will now be saved.
Set VLAN command
See the set iscsi command.
Show command
Displays mpx100/100b operational information.
158 Command line interface