HP EVA Array iSCSI Connectivity Option - Manual (Page 118)

• User name: guest
• Password: password
c. To enable administrator privileges, enter:
• admin start
• config
d. Issue the command:
LUNmask rm
e. Follow the prompts to remove the Solaris iSCSI Initiator from each iSCSI presented target.
For example:
> telnet 10.6.7.65
login: guest
password: password
>admin start
password: config
mpx100 (admin) #> LUNmask rm
Index (WWNN,WWPN/iSCSI Name)
— ——— —————————————
0 50:00:1f:e1:50:00:2f:70,50:00:1f:e1:50:00:2f:7e
Please select a Target from the list above ('q' to quit): 0
LUN Vendor
— ——— —
0 HP
1 HP
2 HP
3 HP
4 HP
.
.
.
Please select a LUN from the list above ('q' to quit): 0
Index Initiator
— ——–
0 iqn.2005-03.com:sanlabmac-s01
1 iqn.1986-03.com.sun:rack81-s16
2 iqn.1991-05.com.microsoft:rack77-s16.sanbox.com
3 iqn.1991-05.com.microsoft:rack77-s14.sanbox.com
4 iqn.1996-04.de.SUSE:bl7-04.sanbox.com
5 iqn.1996-04.de.SUSE:bl7-03.sanbox.com
6 iqn.1996-04.de.SUSE:bl7-02.sanbox.com
.
118 Setting up the iSCSI Initiator for multipathing