Show isns command, Show luns command – HP EVA Array iSCSI Connectivity Option User Manual
Page 164
Authority
None
Syntax
show initiators_LUNmask
Examples
The following is an example of the show initiators_LUNmask command:
mpx100 #> show initiators_LUNmask
Index (WWNN/iSCSI Name)
———————-
0
iqn.1991-05.com.microsoft:hp-8qdaqlxt
Please select an Initiator from the list above ('q' to quit): 0
LUN Number
WWULN
————————————-
0
50:00:1f:e1:50:01:11:50:00:00:00:00:00:00:00:00
1
60:05:08:b4:00:01:1f:60:00:1d:40:00:00:9a:00:00
2
60:05:08:b4:00:01:1f:60:00:1d:40:00:00:9f:00:00
3
60:05:08:b4:00:01:1f:60:00:1d:40:00:00:a2:00:00
4
60:05:08:b4:00:01:1f:60:00:1d:40:00:00:a5:00:00
5
60:05:08:b4:00:01:1f:60:00:1d:40:00:00:a8:00:00
6
60:05:08:b4:00:01:1f:60:00:1d:40:00:00:ab:00:00
7
60:05:08:b4:00:01:1f:60:00:1d:40:00:00:ae:00:00
8
60:05:08:b4:00:01:1f:60:00:1d:40:00:00:bb:00:00
Show iSNS command
Displays iSNS configuration information for the specified iSCSI port. If the port is not specified, the iSNS
configuration information for both iSCSI ports is displayed.
Authority
None
Syntax
show isns [
Parameters
port_num
: The iSCSI port number whose iSNS configuration is to be
displayed.
Examples
The following is an example of the Show iSNS command:
mpx100 #> show isns
iSNS Information
——————
iSCSI Port
1
iSNS
Disabled
IP Address
0.0.0.0
TCP Port No. 3205
iSCSI Port
2
iSNS
Disabled
IP Address
0.0.0.0
TCP Port No. 3205
Show LUNs command
Displays LUN information for each target.
164
Command line interface