HP EVA Array iSCSI Connectivity Option - Manual (Page 162)

Show MGMT command
Displays management information for the mpx100/100b.
Authority None
Syntax show mgmt
Examples The following is an example of the show mgmt command:
mpx100 #> show mgmt
Management Port Information
—————————–
Mode Dhcp
Link Status Up
IP Address 172.17.137.210
Subnet mask 255.255.254.0
Gateway 172.17.136.1
MAC Address 00-c0-dd-0c-60-10
Show iSCSI command
Displays iSCSI information for the specified port. If the port is not specified, both ports are displayed.
Authority None
Syntax
show iscsi []
Parameters
port_num
: The number of the iSCSI port to be displayed.
Examples The following is an example of the show iscsi command:
iSCSI Port Information
————————
iSCSI Port 1
Port Status Enabled
Link Status Up
iSCSI Base Name iqn.1986-03.com.hp:fcgw.mpx100:mpx100-74.0
MAC Address 00-c0-dd-0c-8d-c2
IP Address 33.33.66.73
Subnet Mask 255.255.0.0
Gateway IP Address 0.0.0.0
Firmware Revision No. 3.00.02.44
No. of Open Connections 0
Target TCP Port No. 3260
MTU Size Jumbo
Window Size 32768
Window Scaling Disabled
Current Port Speed 1Gb/FDX
Programmed Port Speed Auto
Header Digests Disabled
Data Digests Disabled
Max Burst 262144
Max First Burst 65536
VLAN Disabled
Show FC command
Displays FC port information for the specified port. If the port is not specified, both ports are displayed.
162 Command line interface