HP M-series HA-Fabric Manager Software - Manual (Page 149)

McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 149
Enter the Show Config Zoning command to display zoning configuration values.
Enter the Show Setup SNMP command to display SNMP configuration values.
Enter the Show Setup Radius command to display RADIUS configuration values.
Table 38 Zoning configuration defaults
Parameter Default
InteropAutoSave True
DefaultZone False
Table 39 SNMP configuration defaults
Parameter Default
SNMPEnabled True
Contact
Location
Description McDATA 4Gb SAN Switch
Trap [1-5] Address Trap 1: 10.0.0.254; Traps 2–5: 0.0.0.0
Trap [1-5] Port 162
Trap [1-5] Severity Warning
Trap [1-5] Version 2
Trap [1-5] Enabled False
ObjectID 1.3.6.1.4.1.1663.1.1.1.1.37
AuthFailureTrap False
ProxyEnabled True
Table 40 RADIUS configuration defaults
Parameter Default
DeviceAuthOrder Local
UserAuthOrder Local
TotalServers 0
DeviceAuthServer False
UserAuthServer False
AccountingServer False
ServerIPAddress 10.0.0.1
ServerUDPPort 1812
Timeout 2 seconds
Retries 0
SignPackets False