Load other types of paper – HP Photosmart C7200 Series User Manual

Page 82

Slide the paper-width guide inward against the stack of envelopes until it stops.
Do not overload the main input tray; make sure the stack of envelopes fits within the
main input tray and is not higher than the top of the paper-width guide.

Push the main input tray back into the HP All-in-One.

Pull the output tray extender towards you, as far as it will go.

Load other types of paper

The following types of paper are designed for special projects. Create your project in the
HP Photosmart Software or another application, set the paper type and size, and then
print.

HP Premium Inkjet Transparency Film and HP Premium Plus Inkjet Transparency
Film

▲

Insert the film so that the white transparency strip (with arrows and the HP logo) is on
top and is going into the input tray first.

NOTE:

For best results, set the paper type to transparency film before printing

on transparency film.

HP Iron-On Transfers

Flatten the transfer sheet completely before using it; do not load curled sheets.

TIP:

To prevent curling, keep transfer sheets sealed in the original package until

you are ready to use them.

Locate the blue stripe on the nonprinting side of the transfer paper and then manually
feed one sheet at a time into the input tray with the blue stripe facing up.

HP Greeting Cards, HP Photo Greeting Cards, or HP Textured Greeting Cards

▲

Insert a small stack of HP greeting card paper into the input tray with the print side
down; slide the stack of cards forward until it stops.

TIP:

Make sure the area on which you want to print is inserted first, print side

down in the input tray.

Inkjet labels

Always use letter or A4 label sheets designed for use with inkjet devices, and make
sure that the labels are no more than two years old. Labels on older sheets might
peel off when the paper is pulled through the HP All-in-One, causing subsequent
paper jams.

Fan the stack of labels to make sure none of the pages are sticking together.

Place a stack of label sheets on top of full-size plain paper in the input tray, label side
down. Do not insert labels one sheet at a time.

For best results, set the paper type and paper size before printing.

Load paper

Loa

rig

als and load

paper

This manual is related to the following products:

Photosmart C7280