HP Photosmart C7200 Series - Manual (Page 170)

15 Troubleshooting
This section contains the following topics:
• Troubleshooting tips
• Hardware setup troubleshooting
• Software installation troubleshooting
• Network troubleshooting
• Print quality troubleshooting
• Print troubleshooting
• Memory card and front USB port troubleshooting
• Scan troubleshooting
• Copy troubleshooting
• Fax troubleshooting
• Errors
Troubleshooting tips
This section contains the following topics:
• Communication problems over a USB connection
• Information on ink cartridges and the print head
• Information on paper
• Tips for using the automatic document feeder
• Clear paper jams
• Clean the automatic document feeder
Communication problems over a USB connection
NOTE: For information on network communication problems, see “Network
troubleshooting” on page 183 . For information on communication problems involving
a memory card, PictBridge camera, or storage device, see “Memory card and front
USB port troubleshooting” on page 208 .
If the HP All-in-One and computer are USB-connected and are not communicating with
each other, try the following:
• Look at the display on the HP All-in-One. If the display is blank and the On button is
not lit, the HP All-in-One is turned off. Make sure the power cord is firmly connected
to the HP All-in-One and plugged into a power outlet. Press the On button to turn on
the HP All-in-One.
• Check the USB cable. If you are using an older cable, it might not be working properly.
Try connecting it to another product to see if the USB cable works. If you experience
problems, the USB cable might need to be replaced. Also verify that the cable does
not exceed 3 meters (9.8 feet) in length.
• Check the connection from the HP All-in-One to your computer. Verify that the USB
cable is securely plugged into the USB port on the back of the HP All-in-One. Make
Troubleshooting 169
Trou
bles
ho
ot
ing