HP Photosmart C7200 Series - Manual (Page 81)

3. Slide the paper-length and paper-width guides inward against the stack of cards until
the guides stop.
Do not overload the photo tray; make sure the stack of cards fits within the photo tray
and is no higher than the top of the paper-width guide.
4. Push in the photo tray, and then lower the output tray.
Related topics
“Change the print settings for the current job” on page 84
Load envelopes
You can load one or more envelopes into the main input tray of the HP All-in-One. Do not
use shiny or embossed envelopes or envelopes that have clasps or windows.
NOTE: For specific details on how to format text for printing on envelopes, consult
the help files in your word processing software. For best results, consider using a label
for the return address on envelopes.
To load envelopes
1. Pull out the main input tray to load envelopes.
2. Remove all paper from the main input tray.
3. Insert one or more envelopes into the far-right side of the main input tray, with the
envelope flaps on the left and facing up. Slide the stack of envelopes forward until it
stops.
Chapter 6
80 Load originals and load paper
Load
origina
ls
a
nd
load
pa
per