HP Photosmart C7200 Series - Manual (Page 37)

To install and print using the Widcomm stack
1. Make sure that you have installed the HP All-in-One software on the computer.
NOTE: The purpose of installing the software is to make sure the printer driver
is available for the Bluetooth ® connection. Therefore, if you have already installed
the software, you do not need to reinstall it. If you want both a USB and a
Bluetooth
® connection to the HP All-in-One, install the USB connection first. For
more information, see the Setup Guide. However, if you do not want a USB
connection, select Directly to the computer on the Connection Type screen.
Also, on the Connect Your Device Now screen, select the check box next to If
you are unable to connect your device now... at the bottom of the screen.
2. Attach an HP bt450 to the front USB port of the HP All-in-One.
3. Click the My Bluetooth Places icon on the desktop or in the taskbar.
4. Click View devices in range.
5. Once the available printers are discovered, double-click the name of HP All-in-One
to finish the installation.
6. Print as you would to any printer.
Use printer sharing
If your computer is on a network, and another computer on the network has an HP All-
in-One connected to it by a USB cable, you can print to that printer using printer sharing.
The computer directly connected to the HP All-in-One acts as the host for the printer and
has full software functionality. The other computer, which is referred to as a client, has
access only to the print features. You must perform other functions from the host
computer or from the control panel on the HP All-in-One.
To enable printer sharing on a Windows computer
▲ Refer to the user guide that came with your computer or see the Windows onscreen
Help.
Connect to a network
This section describes how to connect the HP All-in-One to a network and how to view
and manage network settings.
If you want to: See this section:
Connect to a wired (Ethernet) network. “Wired network setup” on page 37
Connect to a wireless network with a wireless
router (infrastructure). “Integrated wireless WLAN 802.11 network
setup” on page 39
Connect directly to a wireless-capable
computer without a wireless router (ad hoc). “Wireless ad hoc network setup” on page 43
Install the HP All-in-One software for use in a
networked environment. “Install the software for a network connection”
on page 46
Add connections to more computers on the
network. “Connect to additional computers on a
network” on page 47
Chapter 4
36 Finish setting up the HP All-in-One
Finish set
up