HP Photosmart C7200 Series - Manual (Page 156)

13 Maintain the HP All-in-One
The HP All-in-One requires little maintenance. Sometimes you might want to clean the
glass and lid backing to remove surface dust and ensure that your copies and scans
remain clear. You will also need to replace ink cartridges, clean the print head assembly,
or align the printer from time to time. This section provides instructions for keeping the
HP All-in-One in top working condition. Perform these simple maintenance procedures
as necessary.
This section contains the following topics:
• Clean the HP All-in-One
• Check the estimated ink levels
• Work with ink cartridges
• Self-maintenance sounds
• Reduce energy consumption when the HP All-in-One is off
• Turn off the HP All-in-One
Clean the HP All-in-One
To ensure that your copies and scans remain clear, you might need to clean the glass
and lid backing. You might also want to dust the exterior of the HP All-in-One.
TIP: You can purchase an HP Cleaning Kit for Inkjet Printers and All-in-Ones
(Q6260A) that provides everything needed to safely clean your HP device. For more
information, go to:
www.hp.com/buy/supplies .
This section contains the following topics:
• Clean the glass
• Clean the lid backing
• Clean the exterior
Clean the glass
Glass that is dirty from fingerprints, smudges, hair, and dust on the main glass surface
slows down performance and affects the accuracy of features such as Fit to Page.
In addition to the main glass surface, you might also need to clean the small glass strip
inside the automatic document feeder. Streaks can occur if the glass strip inside the
automatic document feeder is dirty.
Maintain the HP All-in-One 155
Maintain the H
P
A
ll-in-One