HP Photosmart C7200 Series - Manual (Page 178)

For more information on installing the software and connecting the USB cable, see
the Setup Guide that came with the HP All-in-One.
The display shows the wrong language
Cause: You might have selected the incorrect language when setting up the HP All-
in-One.
Solution: You can change the language settings at any time from the
Preferences menu.
For more information, see:
“Set your language and country/region” on page 25
I received a message on the display that the printer alignment failed
Cause: The incorrect type of paper is loaded in the input tray (for example, colored
paper, paper with text on it or, certain recycled paper).
Solution: Load unused plain white letter or A4 paper into the input tray, and then
try the alignment again.
If the alignment fails again, you might have a defective sensor on the print head
assembly. Contact HP support. Go to
www.hp.com/support . If prompted, choose your
country/region, and then click Contact HP for information on calling for technical
support.
For more information, see:
“Align the printer” on page 161
The wrong measurements are showing in menus on the display
Cause: You might have selected the incorrect country/region when setting up the
HP All-in-One. The country/region you select determines the paper sizes shown on
the display.
Solution: You can change the country/region settings from the Preferences menu.
For more information, see:
“Set your language and country/region” on page 25
The HP All-in-One does not print
Cause: The HP All-in-One and computer are not communicating with each other.
Solution: Check the connection between the HP All-in-One and computer.
For more information, see:
“Communication problems over a USB connection” on page 169
Cause: There might be a problem with one or more of the ink cartridges.
Hardware setup troubleshooting 177
Trou
bles
ho
ot
ing