Work with ink cartridges – HP Photosmart C7200 Series User Manual
Page 159
To check the ink levels from the control panel
1.
Press Setup.
2.
Press to highlight Tools, and then press OK.
3.
Press to highlight Display Ink Gauge, and then press OK.
The HP All-in-One displays a gauge that shows the estimated ink levels of all
cartridges installed.
4.
Press any button to return to the Tools menu.
To check the ink levels from the HP Photosmart Software
1.
In the HP Solution Center, click Settings, point to Print Settings, and then click
Printer Toolbox.
NOTE:
You can also open the Printer Toolbox from the Print Properties dialog
box. In the Print Properties dialog box, click the Services tab, and then click
Service this device.
The Printer Toolbox appears.
2.
Click the Estimated Ink Level tab.
The estimated ink levels for the ink cartridges appear.
TIP:
You can also print a self-test report to see if ink cartridges might need to be
replaced.
Related topics
“Print a self-test report” on page 149
Work with ink cartridges
To ensure the best print quality from the HP All-in-One, you will need to perform some
simple maintenance procedures and, when prompted by a message on the display,
replace the ink cartridges.
This section contains the following topics:
•
•
•
•
Clean the ink cartridge contacts
•
Remove ink from your skin and clothing
Chapter 13
158
Maintain the HP All-in-One
Maintain
the HP All-in-One