HP Color LaserJet 4700 Printer series - Manual (Page 91)

Setting color supply out response
1. Press Menu to enter the MENUS.
2. Press to highlight CONFIGURE DEVICE.
3. Press to select CONFIGURE DEVICE.
4. Press to highlight SYSTEM SETUP.
5. Press to select SYSTEM SETUP.
6. Press to highlight COLOR SUPPLY OUT.
7. Press to select COLOR SUPPLY OUT.
8. Press or to select the appropriate setting.
9. Press to set the selection.
10. Press Menu .
Jam recovery
This option allows you to configure the printer response to paper jams, including how it handles the
pages involved. AUTO is the default value.
● AUTO — the printer automatically turns jam recovery on when sufficient memory is available.
● OFF — the printer will not reprint any page that was involved in a paper jam. Since no memory is
used to store the most recent pages, performance may be optimal.
● ON — the printer reprints any page involved in a paper jam. Additional memory is allocated to store
the last few pages printed, and this might cause overall printer performance to suffer.
Setting jam recovery response
1. Press Menu to enter the MENUS.
2. Press to highlight CONFIGURE DEVICE.
3. Press to select CONFIGURE DEVICE.
4. Press to highlight SYSTEM SETUP.
5. Press to select SYSTEM SETUP.
6. Press to highlight JAM RECOVERY.
7. Press to select JAM RECOVERY.
8. Press or to select the appropriate setting.
9. Press to set the selection.
10. Press Menu .
ENWW Changing printer control panel configuration settings 75