HP Color LaserJet 4700 Printer series - Manual (Page 75)

Menu item Values Description
pauses until the color supply is replaced.
OVERRIDE AT OUT allows printing to
continue when a color supply is out, but
displays a warning that override is in use
and that the supply must be replaced.
ORDER AT RANGE=0-100 The user can set the percent remaining at
which the ORDER AT message is
displayed. The default is 15.
COLOR SUPPLY OUT STOP
AUTOCONTINUE BLACK
Sets the COLOR SUPPLY OUT printer
behavior when a color supply is empty.
When the printer is set to
AUTOCONTINUE BLACK, the printer will
continue printing using black toner only.
The default is STOP.
JAM RECOVERY AUTO
OFF
ON
Sets whether the printer will attempt to
reprint pages after a jam. The default is
AUTO.
RAM DISK AUTO
OFF
Allows you to specify how the RAM disk is
configured. When set to AUTO, the printer
determines the optimal RAM disk size
based on the amount of available memory.
The default is AUTO. This message
displays in models that do not have a hard
disk installed.
LANGUAGE A listing of available languages
appears. Sets the default language. The default
language is ENGLISH.
Stapler/stacker menu
This menu is available if a stapler/stacker is installed on the printer.
Menu item Values Description
STAPLES NONE
1-EDGE
The STAPLES menu defines how the
stapler/stacker processes a job that has no
stapling instructions. The device can be
configured to staple the job (1-EDGE) or to
not staple the job (NONE). The default is
NONE.
Only supported paper sizes can be stapled.
ENWW Configure device menu 59