HP Color LaserJet 4700 Printer series User Manual
Page 215
Control panel message
Description
Recommended action
MANUALLY FEED
[TYPE] [SIZE]
To continue press
A job was sent specifying MANUAL FEED
and Tray 1 is empty.
No other tray is available.
1.
Load Tray 1 with the correct paper and
press to continue.
2.
If prompted, confirm the size and type
paper loaded.
MANUALLY FEED
[TYPE] [SIZE]
To continue press
alternates with
MANUALLY FEED
[TYPE] [SIZE]
For help press
The job specifies MANUAL FEED, but Tray
1 is already loaded and configured for a type
or size other than that specified in the job.
1.
Load the correct paper in Tray 1.
2.
If prompted, confirm the size and type of
paper loaded.
3.
Otherwise, press to select another
tray.
MANUALLY FEED
[TYPE] [SIZE]
To use another
tray press
alternates with
MANUALLY FEED
[TYPE] [SIZE]
For help press
A job was sent that specified MANUAL
FEED and Tray 1 is empty. Another tray is
available.
1.
Load Tray 1 with the correct paper.
2.
If prompted, confirm the size and type of
paper loaded.
3.
Otherwise, press to select another
tray.
MANUALLY FEED
OUTPUT STACK
alternates with
Then press to
print second sides
The even-numbered pages of a manual two-
sided document have been printed and the
printer is waiting for the output stack to be
inserted for the odd-numbered pages to be
printed.
Follow the instructions on the Print on Both
Sides instruction dialog box at the computer.
OR
Press for help at the printer.
MIXED PAPER SIZES IN
JOB TO STAPLE
The job contains different paper sizes and
cannot be stapled. The status light is solid
green.
Use a uniform paper size when sending jobs
to the stapler.
Moving solenoid
To exit press
Stop
The printer is executing a component test and
the component selected is a solenoid.
No action necessary.
Moving solenoid and motor
To exit press
Stop
The printer is executing a component test and
the components selected are the solenoid
and the motor.
No action necessary.
No job to cancel
There are no stored jobs that can be
cancelled.
No action necessary.
NO STORED JOBS
No jobs stored on the EIO disk. This message
is displayed when the user enters the
RETRIEVE JOB menu and there are no jobs
to retrieve.
No action necessary.
ENWW
Control panel messages
199