HP Color LaserJet 4700 Printer series - Manual (Page 171)

Most process sample books will state which process standards were used to print the sample book. In
most cases they will be SWOP, EURO, or DIC. To get optimal color matching to the process sample
book, select the corresponding ink emulation from the printer menu. If you cannot identify the process
standard, use SWOP ink emulation.
Printing color samples
To use the color samples, select the color sample that is the closest match to the desired color. Use the
sample’s color value in your application to describe the object you wish to match. Colors may vary
depending on paper type and the software application used. For more details on how to use the color
samples, go to
http://www.hp.com/support/clj4700 .
Use the following procedure to print color samples at the printer using the control panel:
1. Press Menu to enter the MENUS.
2. Press to highlight INFORMATION.
3. Press to select INFORMATION.
4. Press to highlight PRINT CMYK SAMPLES or PRINT RGB SAMPLES.
5. Press to select PRINT CMYK SAMPLES or PRINT RGB SAMPLES.
ENWW Color matching 155