beautypg.com

HP Color LaserJet 4700 Printer series User Manual

Page 208

background image

Control panel message

Description

Recommended action

68.X PERMANENT

STORAGE WRITE FAIL

To continue press

A non-volatile storage device is full. Pressing
the button should clear the message.
Printing can continue, but there may be
unexpected behavior.

X Description

0 for onboard NVRAM

1 for removable disk (flash or hard)

1.

Press to continue.

2.

If the message persists, turn the printer
off then on.

3.

If the problem persists, contact
HP Support at

http://www.hp.com/

support/clj4700

.

68.X STORAGE ERROR

SETTINGS CHANGED

For help press

alternates with

68.X STORAGE ERROR

SETTINGS CHANGED

To continue press

One or more printer settings saved in the non-
volatile storage device is invalid and has been
reset to its factory default. Pressing the
button should clear the message. Printing
can continue, but there may be unexpected
behavior.

1.

Press to continue.

2.

If the message persists, turn the printer
off then on.

3.

If the problem persists, contact
HP Support at

http://www.hp.com/

support/clj4700

.

69.X PRINTER ERROR

For help press

alternates with

69.X PRINTER ERROR

To continue

turn off then on

A printer error has occurred.

Turn the printer off then on. Press for more
information.

79.XXXX

PRINTER ERROR

To continue

turn off then on

A critical hardware error has occurred.

1.

Turn the printer off then on.

2.

If the problem persists, contact
HP Support at

http://www.hp.com/

support/clj4700

.

8X.YYYY

EIO X ERROR

The I/O accessory card in slot X has
encountered a critical error.

X Description

1: error in slot 1

2: error in slot 2

1.

Turn the printer off then on.

2.

If the problem persists, contact
HP Support at

http://www.hp.com/

support/clj4700

.

8X.YYYY EMBEDDED

JETDIRECT ERROR

This message is generated by a failure of the
embedded JetDirect print server.

Turn the printer off then on. Press for more
information.

If the message persists, contact HP Support
at

http://www.hp.com/support/clj4700

.

[FS] DEVICE

FAILURE

To clear press

A device failure has occurred on the specified
drive. Printing can continue for jobs that do
not require the Flash DIMM.

1.

To clear the message, press the key.

2.

If the message persists, remove and re-
install the EIO disk drive.

192

Chapter 8 Problem solving

ENWW