beautypg.com

Options for binding two-sided printing jobs, Manual two-sided printing, Options for binding two – HP Color LaserJet 4700 Printer series User Manual

Page 143: Sided printing jobs

background image

NOTE

To select two-sided printing from the printer driver, the driver must first be properly

configured. For instructions, see the online Help for the printer driver. For more information, see

Printer drivers

or

Printer drivers for Macintosh computers

.

Options for binding two-sided printing jobs

Before printing a two-sided document, use the printer driver to choose the edge on which you will bind
your finished document. Long-edge or book binding is the conventional layout used in book binding.
Short-edge or tablet binding is the typical calendar binding.

NOTE

The default binding setting is to bind on the long edge when the page is set up for portrait

orientation. To change to long-edge binding, click the Flip Pages Up check box.

1

Long-edge landscape

1

This layout is often used in accounting, data processing, and
spreadsheet programs. Every other printed image is oriented upside-
down. Facing pages are read continuously from top to bottom.

2

Short-edge landscape

Each printed image is oriented right-side-up. Facing pages are read from
top to bottom on the left page, then from top to bottom on the right page.

3

Long-edge portrait

This is the default printer setting, and the most common layout used, with
every printed image oriented right-side-up. Facing pages are read from
top to bottom on the left page, then from top to bottom on the right page.

4

Short-edge portrait

1

This layout is often used with clipboards. Every other printed image is
oriented upside-down. Facing pages are read continuously from top to
bottom.

1

When using Windows drivers, select Flip Pages to see the designated binding options.

Manual two-sided printing

If you want to print on two sides (duplex) on paper other than the supported sizes or weights (for example,
paper heavier than 120 g/m

2

(32 lb) or very thin paper), you will have to go to the printer and reinsert

the paper manually after the first side has printed.

NOTE

Damaged or previously used paper can cause paper jams and should not be used.

NOTE

Manual two-sided printing is not supported for Windows 98 and systems that use the PS

driver.

ENWW

Two-sided (duplex) printing

127