HP Color LaserJet 4700 Printer series User Manual
Page 210
Control panel message
Description
Recommended action
3.
Reseat the printer on the 500-sheet
input tray.
4.
Turn the printer on after reseating the
500-sheet input tray.
Calibrating...
The printer is calibrating.
No action necessary.
Canceling...
The printer is in the process of canceling a
job. The message will continue to be
displayed while the job is stopped, the paper
path flushed, and any remaining incoming
data on the active data channel is received
and discarded.
No action necessary.
CARD SLOT X NOT
FUNCTIONAL
The flash card in slot X is not working
correctly.
1.
Turn the printer off.
2.
Remove the card from the slot indicated
and replace with a new card.
Checking paper path
The engine is turning its rollers to check for
possible paper jams.
No action necessary.
Checking printer
The engine is doing an internal test.
No action necessary.
CHOSEN PERSONALITY
NOT AVAILABLE
To continue press
alternates with
CHOSEN PERSONALITY
NOT AVAILABLE
For help press
PJL encountered a request for a personality
that did not exist in the printer. The job is
aborted and no pages will be printed.
1.
Press for detailed information.
2.
Press and to step through the
instructions.
3.
Reprint using the correct driver for the
device.
CLEANING DISK X% COMPLETE
A storage device is being cleaned. Do not
turn the printer off. When the process is
complete, the printer will automatically
restart.
No action necessary.
Cleaning...
A cleaning page is being processed.
No action necessary.
Clearing event log
This message is displayed while the event log
is cleared. The printer will exit the MENUS
once the event log has been cleared.
No action necessary.
Clearing paper path
The printer jammed or detected misplaced
paper when turned on. The printer is
attempting to eject jammed pages
automatically.
No action necessary.
CLOSE FRONT COVERS
For help press
The top cover needs to be closed.
Close front covers.
NOTE
This message might also
appear if the fuser is missing or
incorrectly installed. Ensure that the
fuser is correctly installed.
Close top cover.
The top cover of the printer is open.
Close the top cover.
194
Chapter 8 Problem solving
ENWW