HP Color LaserJet 4700 Printer series - Manual (Page 274)

wrinkles or dents from
handling, and that the
media is not
contaminated with
visible fingerprints or
other foreign
substances.
● Make sure that the
following supplies are
seated correctly:
● fuser
● transfer belt
● Inspect the jam areas
and remove any
undetected jammed or
torn media.
first page to help isolate
the defect to a particular
component.
Skewed, stretched, or off-
center page
● Make sure that the
operation and location
requirements of the
printer are met.
● Make sure to use
supported media.
● Make sure that the
media is loaded
correctly.
● For problems with page
skew, turn over the stack
of media and rotate the
stack 180 degrees.
● Make sure that the
following supplies are
seated correctly:
● fuser
● transfer belt
● Inspect the jam areas
and remove any
undetected jammed or
torn media.
258 Chapter 8 Problem solving ENWW