HP Color LaserJet 4700 Printer series - Manual (Page 218)

Control panel message Description Recommended action
Printing...
FONT LIST
The printer is generating either the PCL or PS
personality typeface list. The printer will
return to the Ready state when the page is
completed. No action necessary.
Printing...
MENU MAP
The printer is generating the printer menu
map. The printer will return to the Ready state
when the page is completed. No action necessary.
Printing...
PQ TROUBLESHOOTING
The printer is generating the print quality
troubleshooting pages. The printer will return
to the Ready state when the pages are
printed. Follow the instructions on the printed pages.
Printing...
REGISTRATION PAGE
The printer is generating the registration
page. The printer will return to the SET
REGISTRATION menu when the page is
completed. Follow the instructions on the printed pages.
Printing...
RGB Samples
This message displays while the printer RGB
samples page is being generated. No action necessary.
Printing...
SUPPLIES STATUS
The printer is generating the supplies status
page. The printer will return to the online
Ready state when the page is completed. No action necessary.
Printing...
Usage Page
The printer is generating the usage page. The
printer will return to the online Ready state
when the page is completed. No action necessary.
Processing duplex
job
Do not grab paper
until job completes
Paper temporarily comes into the output bin
while printing a duplex job. Do not attempt to
remove the pages until the job is complete. Do not grab paper as it temporarily comes
into the output bin. The message will
disappear when the job is finished.
Processing... The printer is currently processing a job but
is not yet picking pages. When paper motion
begins, this message will be replaced by a
message that indicates which tray the job is
being printed from. No action necessary.
Processing...
copy of
The printer is currently processing or printing
collated copies. The message indicates that
copy X of Y total copies is currently being
processed. No action necessary.
Processing...
from tray xx
The printer is actively processing a job from
the designated tray. No action necessary.
Processing...
INTERMITTENT MODE
For help press
This message might be displayed during
periods of heavy usage if the printer becomes
overheated. If this occurs, the printer enters
a mode in which it prints for one minute and
pauses for one minute. This cycle continues
until the operating temperature stabilizes. Press to see step by step information.
RAM DISK
SYSTEM IS FULL
The printer received a PJL file system
command that attempted to store something
on the file system but was unsuccessful
because the file system is full. ● To clear the message, press the key.
● If the message persists, turn the printer
off then on.
202 Chapter 8 Problem solving ENWW