HP Color LaserJet 4700 Printer series User Manual
Page 60
Indicator
Solid
Blinking
Off
paper, or staple the job
manually. MIXED
PAPER SIZES IN JOB
TO STAPLE appears on
the printer control panel
display.
Amber
●
The accessory is
experiencing a hardware
malfunction.
For more information,
see
.
●
The device requires user
intervention. The bin
could be full, there could
be a stapler jam, or the
stapler cartridge could
require replacement. For
more information, see
.
If the message
CORRUPT FIRMWARE
IN EXTERNAL
ACCESSORY appears,
download the firmware
again.
●
There is a paper jam, or
a sheet needs to be
removed from the unit,
even if the sheet is not
jammed. For more
information, see
.
●
The bin is full. Empty the
bin before continuing.
●
There are fewer than 30
staples remaining in the
stapler cartridge. To
avoid jams, these
staples should not be
used. Order and install a
new stapler cartridge
before continuing.
●
The bin is in the up
position. Lower the bin
before continuing.
●
The jam access door is
open. Close the door
before continuing.
●
The stapler unit is open.
Close the unit before
continuing.
N/A
44
Chapter 2 Control panel
ENWW